Dosage
2 ml per cubic metre of water to raise the pH by 0,1 point, according to the current product sheet.
Market Spas maintenance product
PH + (1 L)
€13,50 Incl. VAT
Available on request
pH + is used when the pH is too low.
Instructions for use:
Add 2 ml of pH Up per cubic meter of spa water to increase the pH by 0.1 point.
Market Spas product guide
What is Aqua Excellent pH+ 1 L used for?
Gradually raise a pH that is too low in the spa water.
Please note: Do not use pH+ when the reading is already correct or too high.
Instructions for use
How do you use Aqua Excellent pH+ 1 L?
Measure, correct in small steps, let the water circulate, then measure again before any additional dose.
- 1
Measure the pH
Use a suitable test and note the result.
- 2
Calculate the correction
Take into account the actual spa volume and the difference to be corrected.
- 3
Add gradually
Pour in the calculated quantity according to the label without combining corrections.
- 4
Circulate and retest
Wait until the product is properly distributed before measuring again.
Key guidance
Dosage, frequency and precautions
Frequency
Only after a test confirms that the pH is too low.
Precautions
Correct gradually, do not combine pH+ and pH− simultaneously, and follow the label.
Expert advice
Frequently asked questions about Aqua Excellent pH+ 1 L
When should pH+ be used?
Only when a test shows that the water pH is too low.
Why should correction be gradual?
An excessive correction can overshoot the target value and then require correction in the opposite direction.
Can pH+ and pH− be added on the same day?
Never mix them directly. Measure, correct, let the water circulate, then check before any further action.
Complementary products
Complete your maintenance routine
Advice and local collection
Need help with your spa water?
Find your nearest Market Spas showroom or search for your city to get tailored advice.
