Seat 1 of 5 · Lounger 1
Full-body massage

- Recliningseat type
- 5 body zonesmassaged in this seat
Rotate, zoom and adjust the lighting around the exact model.
Faites-le pivoter et composez l'éclairage autour du modèle exact.
Scan this code with your phone, then tap “Open in AR” to place this spa in your home at actual size.
Actual size · 220 × 220 × 82 cm
5, 88 jets. Installed, filled and ready to use.
Hydromassage
Select a seat in the top view to examine its exact layout.
Seating plan

Choose a seat
Seat 1 of 5 · Lounger 1

Seat 2 of 5 · Lounger 2

Seat 3 of 5 · Seat 1

Seat 4 of 5 · Seat 2

Seat 5 of 5 · Seat 3

Areas actually massaged
31 dedicated jets
Areas actually massaged
24 dedicated jets
Areas actually massaged
9 dedicated jets
Areas actually massaged
11 dedicated jets
Areas actually massaged
13 dedicated jets
Three settings to swipe through. Each view leads to the section that explains it in detail.
Discover how our customers have transformed their outdoor spaces into true havens of peace.
Compare verified capacities, dimensions and equipment.
Technical data for the Neptune V2 Odyssey and commitments relating to its installation.
Starting price, including VAT, excluding delivery package and options.
Yes. A dedicated electrical circuit with a suitable residual-current circuit breaker is essential. Most hot tubs require a 230V or 380V supply, depending on the model. Check the required power (in kW) and ask a qualified electrician to prepare the circuit before delivery.
Unless it is a Plug&Play model!
A perfectly flat, stable surface that can support the weight is required. A concrete slab at least 10-15 cm thick is strongly recommended. A reinforced terrace may be suitable, but must be approved by a building professional.
Not necessarily. Hot tubs are usually filled with a garden hose. A nearby water supply can make filling easier, however. A water drainage system (such as a trap or drain grate) is also recommended for emptying.
Allow at least 50 cm around the hot tub for easy access to all technical panels during maintenance. If the hot tub is recessed, provide easily removable access hatches.
Yes, but precautions are needed: effective ventilation, moisture-resistant floor and wall coverings and a water drain in case of overflow. The electrical installation must also be suitable for a humid environment.
Not in most cases, especially for freestanding hot tubs. However, if you are planning a substantial structure (shelter, terrace, equipment room), check with your local council.
The installation itself, excluding preparation, usually takes between 1 and 3 hours. If the electricity, slab and access have been properly prepared, it will be very quick.
Yes. You or a representative must be present to indicate the exact location, check access and confirm correct operation once the hot tub is installed.